HP CommonIO Products Bedienungsanleitung PDF herunterladen (Seite 69)

Configuration

Configuring X.25 over LLC2

Chapter 3 69

The generic X25 configuration file has to be created in the /etc/x25

directory using the example configuration file,

/etc/x25/x25init_llc2_smpl.

The file x25_box_0_host should contain all the mandatory level 2 and

level 3 parameters. Along with them it should contain the following

entries:

device lan3

XOL_logical_port_id 0

XOL_destination_macaddr 0x080009DBEA7

XOL_DSAP 0x7E

XOL_SSAP 0x7E

The LLC2 specific configuration file, llc2_lan_2 is created in the /etc/x25

directory with the following entries:

lan3 1

To start and stop above configuration:

Starting:

Execute the following commands at the command prompt:

x25init -c x25_box_0_host -L llc2_lan_3

Stopping:

To stop the configuration execute the following commands:

x25stop -d lan3 -L 0 # stop XOL interface having logical port id 0 on lan3

Troubleshooting LLC2 Configuration

Symptom: Unable to connect to the remote node.

Causes:

• Hardware address of the remote node is wrongly configured in the

configuration file.

• The SAP value is incorrectly configured.

• The LCI value is incorrectly configured.

Action:

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 260 261

Keine Kommentare

HP CommonIO Products Bedienungsanleitung Seite 69