HP CommonIO Products Bedienungsanleitung PDF herunterladen (Seite 64)

Configuration

Configuring X.25 over LLC2

Chapter 364

To implement the above configuration, the following configuration files need to

be created on the BOX 0.

• Generic X.25 configuration file, x25_box_0_host

• LLC2 configuration file, llc2_lan_1

The generic X25 configuration file has to be created in the /etc/x25 directory

using the example configuration file, /etc/x25/x25init_llc2_smpl.

device lan1

XOL_logical_port_id 0

XOL_destination_macaddr 0x080009DBEA7

XOL_DSAP 0x70

XOL_SSAP 0x70

The file x25_box_0_host must contain all the mandatory level 2 and level 3

parameters. Along with them it should contain the following entries:

The LLC2 specific configuration file, llc2_lan_1 is created in the /etc/x25

directory with the following entries:

lan1 1

To start and stop above configuration:

Starting:

Execute the following commands at the command prompt:

x25init -c x25_box_0_host -L llc2_lan_1

Stopping:

To stop the configuration execute the following commands:

x25stop -d lan1 -L 0 # stop XOL interface with logical port id 0 on lan1

To Connect Box 1 to HOST

To implement the above configuration, the following configuration files need to

be created on the BOX 1.

• Generic X.25 configuration file, x25_box_1_host

• LLC2 configuration file, llc2_lan_2

The generic X25 configuration file has to be created in the /etc/x25 directory

using the example configuration file, /etc/x25/x25init_llc2_smpl.

The file x25_box_1_host must contain all the mandatory level 2 and level 3

parameters. Along with them it must contain the following entries:

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 260 261

Keine Kommentare

HP CommonIO Products Bedienungsanleitung Seite 64