HP CommonIO Products Bedienungsanleitung PDF herunterladen (Seite 24)

Installation

Before You Install the Software

Chapter 224

Before You Install the Software

Before installing the X.25 link software, check the requirements below to

make sure that all required software and hardware has been correctly

installed and configured.

NOTE This product is only supported on the system that is acting as a server. It

is not supported on client systems.

Hardware Requirements

This section describes the hardware requirements of the J2793B X.25

software for HP 9000 server systems.

If you have not already done so, install the X.25 interface card as

described in the hardware installation guide for your X.25 product. If you

are installing multiple X.25 cards, check the requirements in “Installing

Multiple X.25 Interface Cards” below.

If a modem connection is required, connect the X.25 card to the modem

or the modem eliminator according either to the modem vendor’s

specification sheet, or the instructions provided by the network provider.

Installing Multiple X.25 Interface Cards

When installing multiple X.25 cards,

• Always install the cards in adjacent slots in ascending slot order.

• Always install X.25 cards with the system shut down.

• Do not skip slots between X.25 cards.

Hardware Compatibility

• HP 9000 PCI bus

The High Availability feature can run on:

• PCI hardware cards, Product Numbers J3525A (2-ports)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 260 261

Keine Kommentare

HP CommonIO Products Bedienungsanleitung Seite 24