HP CommonIO Products Bedienungsanleitung PDF herunterladen (Seite 180)

Tracing and Logging Utilities

nettl

Chapter 7180

NOTE The device file must be called x25_npx, where n

represents the mandatory card instance number (range

0 to 255). The card instance number is the number

reported by the ioscan -f command output (in the “I”

column). The (lower case) p is a place holder and x

represents the port number (1 or 2). p and x are

required only for systems with dual-port cards.

-traceoff (-tf) This option turns tracing, specified with the -entity

option, off.

-status(-ss) trace Use this option to get a report on the

tracing/logging status.

Examples

To turn tracing on at Level 3 for device x25_1 (interface number 1) and

receive packet header AND packet data information:

nettl -tn pduin pduout -e SX25L3 -c x25_1 -f /tmp/tracex25

To turn tracing off at Level 3 for the device x25_1:

nettl -tf -e SX25L3 -c x25_1

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 260 261

Keine Kommentare

HP CommonIO Products Bedienungsanleitung Seite 180