HP CommonIO Products Bedienungsanleitung PDF herunterladen (Seite 68)

Configuration

Configuring X.25 over LLC2

Chapter 368

To implement the above configuration, the following configuration files

need to be created on the BOX 0.

• Generic X.25 configuration file, x25_box_0_host.

• LLC2 configuration file, llc2_lan_2

The generic X25 configuration file has to be created in the /etc/x25

directory using the example configuration file,

/etc/x25/x25init_llc2_smpl.

The file x25_box_0_host must contain all the mandatory level 2 and level

3 parameters. Along with them it must contain the following entries:

device lan2

XOL_logical_port_id 0

XOL_destination_macaddr 0x080009DBEA7

XOL_DSAP 0x70

XOL_SSAP 0x70

The LLC2 specific configuration file, llc2_lan_2 is created in the /etc/x25

directory with the following entries:

lan2 1

To start and stop above configuration:

Starting:

Execute the following commands at the command prompt:

x25init -c x25_box_0_host -L llc2_lan_2

Stopping:

To stop the configuration execute the following commands:

x25stop -d lan2 -L 0 # stop XOL interface with logical port id 0 on lan2

To Connect Box 1 to HOST

To implement the above configuration, the following configuration files

need to be created on the BOX 1.

• Generic X.25 configuration file, x25_box_1_host.

• LLC2 configuration file, llc2_lan_3

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 260 261

Keine Kommentare

HP CommonIO Products Bedienungsanleitung Seite 68