HP CommonIO Products Bedienungsanleitung PDF herunterladen (Seite 216)

Troubleshooting

Configuration and Troubleshooting Commands

Chapter 8216

NOTE If you do not include the packet_size and window_size values, and the

x25_card_device is the last field, the default values will be applied to

the packet_size and window_size fields.

Example

15.128.174.04 12345 -URC -ARC

30.0.0.2 34567 -URC -ARC device=x25_0,256,7

In this example, a card has been configured with a device equal to x25_0,

a packet size of 256, and a window size of 7.

You can then use the gated or route add command to send datagrams

to the IP address, 30.0.0.2, routed through your X.25 network to the

address, 34567. These packets will be sent out through the X.25 card

that corresponds to the deveice x.25_0.

File Mapping Parameters

IP_address Specifies a valid IP address in standard dot notation

form:

n.n.n.n

where n is a number from 0 to 255 inclusive.

X.121_address Specifies the corresponding X.121 address for the host

with the above IP address.

pvc=n Specifies which permanent virtual circuit should be

used for the X.121 destination. The value pvc= is a

keyword set to n, which is an integer variable

indicating the lci of the permanent virtual circuit. This

keyword/variable pair is specified only when a

permanent virtual circuit is to be used for IP access.

When it is not specified, the default value of a two-way

SVC is assumed.

The following information is provided for reference

only.

1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 260 261

Keine Kommentare

HP CommonIO Products Bedienungsanleitung Seite 216