HP CommonIO Products Bedienungsanleitung PDF herunterladen (Seite 59)

Configuration

Configuring X.25 over LLC2

Chapter 3 59

def_inwindow 7 # default window size

def_outwindow 7 # default window size

def_inthruputclass 19200 # default thruput class

def_outthruputclass 19200 # default thruput class

flowcontrol on # flow control negotiation allowed

neg_inpacketsize 128 # offered packet size if using flow control negotiation

neg_outpacketsize 128 # offered packetsize if using flow control negotiation

neg_inwindow 7 # offered window size if using flow control negotiation

neg_outwindow 7 # offered window size if using flow control negotiation

thruputclass on

neg_inthruputclass 19200 # offered thruput class if using thruput class

negotiation

neg_outthruputclass 19200 # offered thruput class if using thruput class

negotiation

pvc_inpacketsize 128 # packetsize for PVCs

pvc_outpacketsize 128 # packetsize for PVCs

pvc_inwindow 7 # window size for PVCs

pvc_outwindow 7 # window size for PVCs

# IP Related Parameters

IP 15.4.64.120 255.255.248.0 # IP address and subnet mask

mtu 1024 # max transmission unit 1024 octets

hold 300 # 5 minute hold timer

idle 600 # 10 minute idle timer

NOTE For an XOL configuration, L3 packet sizes greater than 1024 are not

supported.

If the XOL interface on the host is connected to a router supporting X.25

over LLC2, the router must be configured with the correct routing

entries. For example, if an XOL interface on the host is connected to a

CISCO router and the XOL configuration on the host is identical to the

configuration in the previous example, the following configuration is

required:

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 260 261

Keine Kommentare

HP CommonIO Products Bedienungsanleitung Seite 59