HP CommonIO Products Bedienungsanleitung PDF herunterladen (Seite 37)

Configuration

Configuring the X.25 Link

Chapter 3 37

Step 3. Enter or modify field values as required (refer to the following field

descriptions).

Table 3-3 Configure Internet Address Field Descriptions

Internet Address The identifier by which this interface (port) is

known on the network. It consists of four sets of

integer values (0 to 255) separated by periods (for

example, 192.2.3.6). The IP address must be

unique for each X.25 interface. It must also

specify a different subnet from the IP address of

any other X.25 or LAN interface on this system.

To obtain an IP address, see your system

administrator, network administrator, or HP

representative.

Subnet Mask The subnet mask (like IP addresses) is composed

of four integers (0 to 255) separated by periods.

The subnet mask is used for routing.

When you enter an IP address, SMH places a

default subnet mask in the subnet mask field,

depending on the class of IP address you enter.

You may use the default or enter another one if

required. Table 3-4, “IP Address and Default

Subnet Masks,” shows the IP addresses listed by

class and their default subnet masks).

IP Address Alias The symbolic name (in alphanumeric format) by

which this network interface will be known on

the network. Use the Add/Modify Host Name

Aliases button to add or modify aliases.

Table 3-4 IP Address and Default Subnet Masks

IP Address Class

Default Subnet

Mask

A.*.*.* (A between 1 and

127)

A 255.0.0.0

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 260 261

Keine Kommentare

HP CommonIO Products Bedienungsanleitung Seite 37