HP CommonIO Products Bedienungsanleitung PDF herunterladen (Seite 149)

PAD Services

UUCP Support (x29uucpd)

Chapter 6 149

name Mandatory. This is the name of the programmatic

interface that will be used for call setup. There is no

default for this entry. If this entry does not exist, the

call setup will not be completed and file transfer will

not take place. This name must match with the

programmatic access name (also called name) specified

in x25init.

remote_x121 Mandatory. This is the X.121 address of the X.25

interface card of a host system where the PAD support

program (for example, /usr/sbin/x29server) is

running. This address is required for calls to be

initiated. There is no default for this address.

cud Optional. This is the Call User Data (CUD) appended

to the protocol ID (0x01000000) for any call request

packets sent to this device. Strings of 12 characters or

less are permitted.

cug Optional. This is a the Call User Group (CUG)

number (a positive value between 0 and 99) embedded

in the call request packet sent to this device.

logging Optional (default = 1). Specifies the logging level for

each UUCP connection to this device. The log file is

/var/x25/log/x29uucpd/[device_name][child_pid

]. Logging levels for this UUCP device are 0, 1, 2, or 3

where:

0 – No logging (no log file is created).

1 – Error logging.

2 – Error and warning logging.

3 – Error, warning, information, and status logging for

troubleshooting.

HP recommends using log level 0 (no logging) for

normal operation.

reverse_charge Optional (default is disable). Specifies the reverse

charge option for call setup at this address. Possible

settings are disabled (or disable) and enabled (or

enable). When reverse charge is enabled, x29uucpd

sends out call request packets with reverse charge

requested.

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 260 261

Keine Kommentare

HP CommonIO Products Bedienungsanleitung Seite 149