HP 1920-24G-PoE+ Bedienungsanleitung PDF herunterladen (Seite 34)

100

101

NOTE:

• The serial port on a PC does not support hot swapping. When you connect a PC to a powered-on switch,

connect the DB-9 connector of the console cable to the PC before connecting the RJ-45 connector to the

switch.

• When you disconnect a PC from a powered-on switch, disconnect the DB-9 connector of the console

cable from the PC after disconnecting the RJ-45 connector from the switch.

Setting terminal parameters

To configure and manage the switch, you must run a terminal emulator program on the console terminal.

The following are the required terminal settings:

• Bits per second—38,400

• Data bits—8

• Parity—None

• Stop bits—1

• Flow control—None

• Emulation—VT100

To set terminal parameters, for example, on a Windows XP HyperTerminal:

1. Select Start > All Programs > Accessories > Communications > HyperTerminal.

The Connection Description dialog box appears.

2. Enter the name of the new connection in the Name field and click OK.

Figure 15 Connection description

3. Select the serial port to be used from the Connect using list, and click OK.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 546 547

Kommentare zu diesen Handbüchern

Keine Kommentare

HP 1920-24G-PoE+ Bedienungsanleitung Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software HP 1920-24G-PoE+