HP 10TB Betriebsanweisung PDF herunterladen (Seite 173)

SLEEP

Syntax

SLEEP <seconds>

Description

Pauses the session for a fixed period of time. Useful for adding delays to scripts. The <seconds>

parameter can be any whole number from 1 to 86400.

NOTE: Once the pause begins, there is no way to continue the session before time runs out, but

you can always terminate the session (from the client end) and start another one.

Restrictions

The <seconds> parameter can be any whole number from 1 to 86400.

Using the Enclosure Manager physical interface

The primary interface to the Enclosure Manager is the Ethernet LAN port, which is intended for

remote management of the enclosure. AC power is applied to the enclosure so that auxiliary power

is available to the EMU. The enclosure may or may not be powered on. Solution software may or

may not be installed.

Manual button functions

IMPORTANT: Use the following manual button functions only with the assistance of HP Technical

Support.

The two manual buttons and a two-digit LED display on the EM provide basic management functions

when the EM is not connected to the network. Figure 143 (page 173) illustrates the physical

(touch/visual) interaction elements.

Figure 143 EM Physical Interface

Activate Button Menu

You cannot manage the EM using a remote management interface because the system is not

connected to the LAN, the LAN interface is not functioning properly, or management software is

not installed or available.

To activate the button menu:

1. Press and hold the UP (right) button until the two digits display “- -“.

2. Release the UP button. System displays two underscores “_ _”:

This display indicates context is at the bottom of the menu range and is awaiting menu selection,

which requires pressing the UP button one or more times.

Using the Enclosure Manager physical interface 173

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 179 180 181

Keine Kommentare

HP 10TB Betriebsanweisung Seite 173