HP 10TB Betriebsanweisung PDF herunterladen (Seite 166)

RESTART EM

Syntax

RESTART EM

Description

This reboots the Linux OS and restarts the EM software. It is necessary to do this command following

a firmware downgrade using UPGRADE IMAGE FORCE. Except when in script mode, the user is

prompted for an explicit confirmation, which must be given or the command is terminated.

Restrictions

None

SET EM NAME

Syntax

SET EM NAME "<EM name>"

Description

Sets the user defined string reported with SHOW EM STATUS. The system responds with confirmation

of the change. The default EM name is “EM-<mac address>” where <mac-address> is the

hardware Ethernet address for the iLO port on the EMU. For example, EM-78E7D1C12074.

Restrictions

<EM name> must be 1 to 32 characters long and includes all alphanumeric, underscore (_) , and

hyphen (-) characters.

SET ENCLOSURE ASSET

Syntax

SET ENCLOSURE ASSET [TAG] "<asset tag>"

Description

Sets the enclosure asset tag that is stored persistently in the EM, displayed with SHOW ENCLOSURE

INFO command.

Restrictions

<asset tag> must be 1 to 32 characters long and includes all alphanumeric, underscore (_)

and hyphen (-) characters.

Restrictions

<id> is a decimal integer from 0 to 99.

SET ENCLOSURE NAME

Syntax

SET ENCLOSURE NAME "<enclosure name>"

Description

Sets the persistent enclosure name stored in the EM. This name is displayed with SHOW ENCLOSURE

INFO command. The default (unset by user) value is ‘UnnamedEnclosure’.

166 Managing the EMU

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 180 181

Keine Kommentare

HP 10TB Betriebsanweisung Seite 166