HP B8C95AA Bedienungsanleitung PDF herunterladen (Seite 69)

100

101

HP Designjet T Series — Service Manual 2-9

System Error Codes - Full Descriptions

4 If the System Error continues, replace the Trailing Cable and Carriage PCA

Covers. See

Trailing Cable (T1100/T1100ps/T610) on page 6-102 or

Trailing Cable (T1120/T1120ps) on page 6-109.

5 If the System Error continues, replace the Carriage PCA. See

Carriage PCA

(T1100/T1100ps/T610) on page 6-173 or Carriage PCA (T1120/

T1120ps) on page 6-178.

6 If the System Error continues, replace the Main PCA. See

Electronics Module

Main PCA and PSU (T1100/T1100ps/T610) on page 6-202 or Electronics

Module Main PCA and PSU (T1120/T1120ps) on page 6-205.

7 Replace the Carriage Assembly. See

Carriage Assembly (T1100/T1100ps/

T610) on page 6-116 or Carriage Assembly (T1120/T1120ps) on page 6-

127.

System Error:

03:YZ

Problem

Description:

Problem with Power Supply Unit.

Corrective Action: Try the following:

1 Switch the Power OFF from the back of the Printer and disconnect the Power

cor

d. Reconnect the power cord and power On the Printer.

2 Perform the Electronics Module Test Diagnostic to troubleshoot the problem

rther. See

3. Electronics Module on page 3-21.

3 If the System Error continues, replace the Power Supply Unit (PSU). See

Electronics Module Main PCA and PSU (T1100/T1100ps/T610) on page

6-202 or Electronics Module Main PCA and PSU (T1120/T1120ps) on

page 6-205.

System Error:

03.0:10

Problem

Description:

Battery of Real Time Clock ran down.

Corrective Action: Replace the battery:

1 Turn the printer off and unplug the cable. Unplug any network or USB

cables

2 Loosen the screws that attach the formatter to the printer with your fingers, or

ith the help of a flat screwdriver, and remove the formatter.

3 Locate the round, flat battery in the formatter.

4 Push the battery slightly to one side and then pull it up. A little force may be

quired.

5 Insert the new battery by pressing it down.

6 Insert the formatter into the printer by pressing it down, and tighten the

rews.

7 Reconnect the cables and turn the printer on.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 489 490

Kommentare zu diesen Handbüchern

Keine Kommentare

HP B8C95AA Bedienungsanleitung Seite 69

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen HP B8C95AA