HP B8C95AA Bedienungsanleitung Seite 35

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 490
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 34
HP Designjet T Series — Service Manual 1-31
Print quality troubleshooting
Horizontal smears on the front of coated paper
If a lot of ink is used on plain or coated paper, the paper absorbs the ink
quickly and expands. As the printheads move over the paper, the printheads
may come into contact with the paper and smear the printed image. This
problem is normally seen only on cut sheets of paper (not on roll paper).
Corrective Action
1 Check that the paper type loaded corresponds to the paper type selected in
the f
ront panel and in the software. You can verify the paper type selected
through the Front Panel (Main Menu/Paper menu/View loaded paper).
2 U
se a recommended paper type and the correct print settings.
3 If using sheet paper, try rotating the sheet 90 degrees. The orientation of the
paper
fibers may affect performance.
4 Try using a heavier paper type. When printing
dense colors, it is
recommended to use HP Heavyweight Coated Paper or HP Super
Heavyweight Coated Paper.
5 T
ry to increase the margins by relocating the image to the center of the page
wi
th the software application being used.
Ink marks on the back of the paper
This can happen after a lot of border less printing, especially with non-
standar
d paper sizes. Ink residues on the platen are likely to mark the back
of the paper.
Corrective Action
Clean the platen with a soft cloth. Clean each rib separately without
touching the foam between the ribs.
Seitenansicht 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 489 490

Kommentare zu diesen Handbüchern

Keine Kommentare