
HP Designjet T Series — Service Manual 3-47
Service Tests (Diagnostics)
6 Press OK to switch on the Aerosol Fan. If you do not wish to switch on the
Aerosol Fan use the Arrow keys to select NO and press OK.
7 The test continues and the Front Panel displays the following message:
Turning on Aerosol Fan.
8 The Front Panel then displays the results.
9 Press any key to continue.
10 The front panel prompts you to check if the Aerosol Fan is operating.
11 Listen carefully to check if the Aerosol Fan is operating.
12 If it is operating, use the Arro
w keys to select YES and press OK. If it is
NOT operating, select NO and press OK.
13 The Front Panel then displays the following message:
Checking Fault condition
14 The Front Panel shows the test result.
15 Press any key to finish.
16 The Front Panel shows the test complete display for a few seconds.
Kommentare zu diesen Handbüchern