HP B8C95AA Bedienungsanleitung PDF herunterladen (Seite 105)

HP Designjet T Series — Service Manual 2-45

Appendix B: Updating firmware in diagnostics boot mode

e If you are using the HP-GL/2 driver, try sending the job as a bitmap

5 If you are using a 3rd party application that does not print through the HP

driver, try modifying the printing workflow by:

a Using an HP driver

b Changing the settings in the application’s printing dialog

6 Escalate the issue with the following information:

 Unit information: S/N, P/N, accessories

 The printer information pages (either printed and faxed or obtained

through the Embedded Web Server)

 The System Error detailed information (it can be obtained by pressing

CANCEL + Down)

 Information on the workflow:

– Operating System

– Application

– Driver

– Settings in the driver and the application

– Settings in the printer

– Connection method and settings

 Exact information on how to replicate the environment that reproduces the

issue, including some example files that can be sent to the printer to

replicate a heavy load environment. These files will need to be:

– Original application files, if the issue happens printing from an

appli

cation through our driver

– Print to files if the issue happens printing from a 3rd party application

 Information on the approximate frequency of the occurrence of the issue

 The printer logs. In order to obtain the printer logs, check the following

appendix.

Appendix B: Updating firmware in diagnostics boot mode

If the printer is displaying a 79:04 system error during start up and will not

start normally, then services like the Embedded Web Server will not work.

Since the EWS is necessary to update the printer’s firmware using the FMW

le which is provided in Designjet Online, when the printer does not boot,

an alternative method to update the firmware will be required.

The following method can be used to upgrade the firmware of a printer that

ll not boot normally:

1 Start the printer in Diagnostics Boot mode. See

Using the Front Panel on

page 3-5.

2 Perform the I/O information test and take note of the printer’s IP address.

See

9. I/O Information on page 3-48.

3 Connect to the printer using FTP:

a From a DOS console (or a Linux console in Mac), open a connection to

the pr

inter: ftp <printer’s IP address>

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 489 490

Kommentare zu diesen Handbüchern

Keine Kommentare

HP B8C95AA Bedienungsanleitung Seite 105

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen HP B8C95AA