HP Vectra 520 Installationsanleitung PDF herunterladen (Seite 285)

100

101

6-30 Workstations

553-4001-111 Standard 1.0 March 1997

DEC VT420 or 100% compatible (North American model)

Follow Procedure 6-8 to set up the DEC VT420 (North American model)

workstation.

Procedure 6-8

To set up a VT420 or 100%-compatible terminal (North American

model)

1 Refer to the vendor’s manual for installation instructions.

2 The video display terminal (VDT) is connected to the SNN’s VME

multiport cable or the IPE’s four-port I/O cable using an NT8D96AE

(SNN) or NT1R03Ex (IPE) (male to female) cable. Refer to the

appropriate port assignment table for valid port assignments.

3 Power on the terminal and press the {SET-UP} key.

The VDT manual contains instructions on setting up the workstation’s

options.

4 Follow the settings in Figure 6-6 to configure a DEC VT420 North

American model.

Each directory shown in these figures has its own screen and displays

the correct setting for each field. If any of the fields shown differ from

those on your screen, cursor to the field and press {RETURN} until the

correct information is displayed.

5 To move to the next set-up screen, cursor to

To Next Set-up

and press

{RETURN}.

6 Move the cursor to

To Directory

and press {RETURN}.

7 Move the cursor to

Save

and press {RETURN}.

8 To exit after saving the settings, press the {SET-UP} key.

1 2 ... 280 281 282 283 284 285 286 287 288 289 290 ... 502 503

Kommentare zu diesen Handbüchern

Keine Kommentare

HP Vectra 520 Installationsanleitung Seite 285

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für PC / Workstation Barebones HP Vectra 520