HP Web Jetadmin Software Bedienungsanleitung PDF herunterladen (Seite 330)

Use the following steps to congure this option:

1. Check the Enable AutoSend box to enable this feature.

2. Select the frequency to send conguration and supplies information in Send every.

3. If you have a relationship with HP that provides you with services such as proactive cartridge replacement,

pay per page contracts, support agreements, or usage tracking, enable the Send to HP using HTTPS

feature. Information is always sent to HP securely using HTTPS POST, if possible. Otherwise, you can

choose to allow this information to be sent using email if HTTPS fails or is unavailable.

4. If you want to send the same information to a custom list of web addresses or email addresses, enable

those features and enter the appropriate addresses.

AutoStore

AutoStore is an automated document and content capture solution for HP MFP devices. The AutoStore product

consists of a server-based application, AutoStore Server, and an installable embedded Web server application,

AutoStore ChaiService.

The AutoStore ChaiService contacts the AutoStore Server on a regular basis to determine whether there is a new

set of AutoStore menus to download and display on the front panel of a device. To do this, it must be congured

with the AutoStore Server information. You can also congure how frequently the AutoStore ChaiService will

contact the AutoStore Server.

NOTE: To protect the AutoStore menus, use a device's authentication feature. If authentication is used,

congure the AutoStore ChaiService to revoke authentication when certain events occur.

NOTE: For convenience, congure the AutoStore ChaiService to contact the AutoStore Server immediately for

new AutoStore menus, especially when the administrator is testing a newly designed set of AutoStore menus.

After AutoStore is installed and congured, the front panel on a device or group of devices displays the AutoStore

menus. These menus allow users to easily scan, process, and route documents to pre-programmed

destinations. For example, an MFP device scans the documents, and then the AutoStore Server processes and

then routes the documents to a destination.

NOTE: If the AutoStore ChaiService is installed on a device(s), you must congure the AutoStore ChaiService to

use the service.

NOTE: HP Web Jetadmin does not display the current conguration settings in this section. You can use

HP Web Jetadmin to change the conguration settings. To view the conguration settings, you must use

HP Web Jetadmin to browse to the device embedded Web server.

Use the following steps to congure this option:

1. Select either IP Address or Hostname and then type the IP address or hostname in the corresponding text

box.

2. Type the network port value in Port (1 to 9999).

3. To specify how often to poll the AutoStore Server, type the interval (in minutes) in Interval.

4. If displayed, set the Authentication timeout.

5. If displayed and if desired, select Revoke authentication on reentry.

6. Click Apply.

304 Chapter 6 Device Conguration Options ENWW

1 2 ... 325 326 327 328 329 330 331 332 333 334 335 ... 491 492

Keine Kommentare

HP Web Jetadmin Software Bedienungsanleitung Seite 330