HP Web Jetadmin Software Bedienungsanleitung PDF herunterladen (Seite 106)

1. On the top menu bar, access Tools > Options > Device Management > Alerts > Log to File.

2. After you select Enable, specify the maximum le size for the log.

To clear the log, select Clear.

3. Select the language for the log.

4. To make changes to the log le, click Edit. The Edit Alert Log to File Template page is displayed.

5. Type the eld directly into the Body.

Or, you can insert elds:

●

Select the source for available elds in Source.

●

Highlight the eld in Available Fields (at the left of this page) and then click Insert Field (at the right of

this page).

6. Click the Apply button.

7. To reset the format to factory settings (its state when rst installed), click Restore.

Congure the Format for SNMP Traps

The SNMP Trap Generator provides an easy way to integrate HP Web Jetadmin with another management

application. You can create alert subscriptions in HP Web Jetadmin for the device alerts that you want forwarded

to the management application. The alert subscription species information about the server where the SNMP

traps are sent and the format for the SNMP traps. When HP Web Jetadmin processes one of these device alerts,

it forwards the SNMP trap to the specied server and port.

The SNMP Trap Generator supports only one format for the SNMP traps. If you change the format, all of the

existing and future alert subscriptions that generate SNMP traps use the new format.

To handle an SNMP trap from the SNMP Trap Generator, load the MIB le (webjet.mib) or HP System Insight

Manager CFG le (webjet.cfg) into the management application that receives the SNMP traps. After you direct the

MIB or CFG le to read the trap variable, you can view the formatted SNMP trap. The MIB and CFG les are

available in the following directory:

C:\Program Files\HP Inc\Web Jetadmin 10\views\dav\bin

To congure the format for SNMP traps, perform the following steps:

NOTE: HP Web Jetadmin uses the displayed format for all of the forwarded SNMP traps.

1. Go to Tools > Options > Device Management > Alerts > SNMP Trap Generator.

2. To change the format, perform the following steps:

a. Click the Edit button.

b. On the Edit SNMP Trap Template window, make the changes to the format.

c. Click the OK button.

3. To reset the format to the default, click the Restore button.

Firmware Conguration Options

Global settings can be stored here for managing rmware images and how devices are updated.

80 Chapter 2 Introduction to HP Web Jetadmin ENWW

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 491 492

Keine Kommentare

HP Web Jetadmin Software Bedienungsanleitung Seite 106