Hp ProLiant DL380 Server Bedienungsanleitung Seite 80
- Seite / 128
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Hardware options installation 80
9.
Install the TPM security rivet by pressing the rivet firmly into the system board.
10. Install the air baffle.
11. Install the PCI riser cage (on page 27).
12. Install the access panel (on page 23).
13. Install the server into the rack ("Installing the server into the rack" on page 35).
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server (on page 21).
Retaining the recovery key/password
The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after
BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery
key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of system
integrity.
To help ensure maximum security, observe the following guidelines when retaining the recovery
key/password:
• Always store the recovery key/password in multiple locations.
• Always store copies of the recovery key/password away from the server.
• Do not save the recovery key/password on the encrypted hard drive.
Enabling the Trusted Platform Module
1. When prompted during the start-up sequence, access RBSU by pressing the F9 key.
2. From the Main Menu, select Server Security.
3. From the Server Security Menu, select Trusted Platform Module.
4. From the Trusted Platform Module Menu, select TPM Functionality.
5. Select Enable, and then press the Enter key to modify the TPM Functionality setting.
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Contents 6 6
- Component identification 7
- Front panel LEDs and buttons 8
- Item Description Status 9
- Press and release the panel 9
- Systems Insight Display LEDs 10
- Rear panel components 12
- Rear panel LEDs and buttons 12
- System board components 14
- System maintenance switch 15
- NMI functionality 16
- DIMM slot locations 16
- SAS and SATA device numbers 17
- PCI riser cage LED 17
- Hot-plug fans 19
- Component identification 20 20
- Operations 21
- Remove the access panel 22
- Install the access panel 23
- Remove the hot-plug fan cage 24
- Remove the hot-plug fan 25
- Install the PCI riser cage 27
- Remove the air baffle 29
- Rack planning resources 31
- Optimum environment 31
- Temperature requirements 32
- Power requirements 33
- Rack warnings 34
- Installing hardware options 35
- Registering the server 38
- Introduction 39
- Processor and fan option 39
- Install the heatsink 44
- Remove the two fan blanks 44
- Memory options 46
- HP SmartMemory 47
- DIMM identification 48
- Memory configurations 49
- Installing a DIMM 51
- Hot-plug hard drive options 52
- Controller options 54
- Optical drive option 58
- FlexLOM option 61
- Expansion board options 63
- Hard drive cage option 68
- Remove the fan cage 70
- 13. Connect the cables: 72
- Install the fan cage 75
- Install the air baffle 75
- 2U rack bezel option 77
- 7. Reboot the server 81
- Cabling 82
- Optical drive cabling 83
- FBWC cabling 84
- Chipset SATA cable option 85
- 150W PCIe power cable option 88
- Server mode 89
- Server QuickSpecs 89
- HP iLO Management Engine 89
- Active Health System 90
- Intelligent Provisioning 91
- Erase Utility 92
- HP Service Pack for ProLiant 93
- HP ROM-Based Setup Utility 94
- Boot options 95
- Configuring AMP modes 95
- Utilities and features 96
- ROMPaq utility 97
- Automatic Server Recovery 98
- USB support 98
- Redundant ROM support 98
- Keeping the system current 99
- ProLiant Servers 100
- Troubleshooting 101
- Battery replacement 102
- FCC rating label 103
- Modifications 104
- • EMC Directive 2004/108/EC 105
- BSMI notice 106
- Korean notice 106
- Japanese notice 106
- Chinese notice 107
- Laser compliance 107
- Battery replacement notice 107
- Electrostatic discharge 109
- Specifications 110
- Specification Value 113
- Technical support 114
- Technical support 115 115
- Customer Self Repair 116
- Technical support 117 117
- Reparo feito pelo cliente 118
- Technical support 119 119
- Technical support 120 120
- Technical support 121 121
- Acronyms and abbreviations 122
- Documentation feedback 125
- Index 126 126
- Index 127 127
- Index 128 128
Verwandte Produkte und Handbücher für Computerhardware Hp ProLiant DL380 Server
(88 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.148 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern