Hp ProLiant DL380 Server Bedienungsanleitung PDF herunterladen (Seite 86)

Cabling 86

WARNING: Eliminate the risk of electric shock by removing all AC power from the system before

installing or replacing any non-hot-plug hardware option. Disconnect all power cords to

completely remove power from the server.

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

IMPORTANT: It is necessary to remove the PCI riser cage only if there is a full-length expansion

board installed.

5. Release the full-length expansion board retainer, and then remove the PCI riser cage.

6. Remove the air baffle (on page 29).

7. Remove the fan cage ("Remove the hot-plug fan cage" on page 24).

8. Disconnect any SAS cables from the hard drive cage and either the embedded SAS controller or an

optional SAS controller. Do not disconnect the power cable.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 127 128

Keine Kommentare

Hp ProLiant DL380 Server Bedienungsanleitung Seite 86