Hp ProLiant DL380 Server Bedienungsanleitung PDF herunterladen (Seite 88)

Cabling 88

17.

Install the server in the rack ("Installing the server into the rack" on page 35).

18. Remove any installed hard drives ("Removing a hot-plug SAS or SATA hard drive" on page 53).

19. Install a SATA hard drive ("Installing a hot-plug SAS or SATA hard drive" on page 52) in hard drive bay

20. Install hard drive blanks in any empty hard drive bays.

21. Connect each power cord to the server.

22. Connect each power cord to the power source.

23. Power up the server (on page 21).

24. Using the HP ROM-Based Setup Utility (on page 94), disable the embedded HP Smart Array P420i

Controller, if necessary.

150W PCIe power cable option

CAUTION: To prevent damage to the server or expansion boards, power down the server and

remove all AC power cords before removing or installing the PCI expansion cage.

Connect the cable as indicated:

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 127 128

Keine Kommentare

Hp ProLiant DL380 Server Bedienungsanleitung Seite 88