HP 2000CP 2500CP Bedienungsanleitung Seite 303

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 348
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 302
8-82 Removal and Installation
HP DesignJet CP Series Printers
Installation
1. Install the three T-20 screws (item 6) securing the left hand roll feed
assembly to the left hand side chassis.
2. Install the three T-20 screws (item 7) securing the right hand roll feed
assembly to the right hand side chassis.
3. Install the roll cover (item 4) into the correct position in the roll feed
assemblies.
4. Move the adjustment bracket as far left as it can go to secure the roll
cover to the left hand chassis, then tighten the nuts (item 5) on the
adjustment bracket.
5. Install the two roll cover springs (item 3) onto the roll cover with two
T-10 screws (item 2).
6. Install the spindle assembly (item 1) by pushing it into the retaining
clips in the roll feed assembly.
7. Install the following:
1. Service Station Assembly page 8-26.
2. Right Hand Cover page 8-21.
3. Left Hand Cover page 8-18.
4. Window and Top Cover page 8-15.
8. Connect the power cord.
Seitenansicht 302
1 2 ... 298 299 300 301 302 303 304 305 306 307 308 ... 347 348

Kommentare zu diesen Handbüchern

Keine Kommentare