HP 2000CP 2500CP Bedienungsanleitung Seite 276

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 348
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 275
8-55
Removal and Installation
HP DesignJet CP Series Printers
Refill Assembly
Refer to figure 19 page 8-57
Removal

Switch off the printer and remove the power cord.
1. Remove the following:
1. Window and Top Cover page 8-15.
2. Left Hand Cover page 8-18.
2. Disconnect the following cables from the refill interconnect PCA (item 1):
1. Valve sensor cable in position J4 VALVE SENSOR
2. Door Sensor cable in position J6 DOOR SW
3. Refill Sensor Cable in position J3 REFILL SENSOR
3. Remove the cables from two cable clamps (item 2) on the left hand side
chassis.
4. Carefully disconnect from the refill stepper motor the refill stepper
motor cable (item 3).
5. Remove the cable clamp securing the cables to the Y-axis bracket.
6. Loosen fully the three T-20 screws (item 4) from the refill assembly.
7. Remove the T-20 screw (item 5) at the end of the metal rod securing it to
the Y-axis bracket (item 6).
8. Remove the refill assembly (item 7).
Seitenansicht 275
1 2 ... 271 272 273 274 275 276 277 278 279 280 281 ... 347 348

Kommentare zu diesen Handbüchern

Keine Kommentare