HP 2000CP 2500CP Bedienungsanleitung Seite 263

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 348
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 262
8-42 Removal and Installation
HP DesignJet CP Series Printers
Carriage Assembly
Refer to figure 14 page 8-44
Removal

Switch off the printer and remove the power cord.
1. Remove the following:
1. Left Hand Cover page 8-18.
2. Window and Top Cover page 8-15.
3. Right Hand Cover page 8-21.
4. Service Station Flag page 8-26
5. Encoder Strip page 8-32.
6. Y-Axis Belt page 8-39.
2. Carefully disconnect the trailing cable from the carriage assembly.
3. Remove the trailing cable carriage clamp (item 1) from the carriage by
releasing it from the retaining clips.
4. Remove the Y-axis tensioner holder by removing two T-20 screws from
the slider rods.
Caution: The rear bushing (item 2) on the carriage assembly is
tensioned with a spring (item 3). When removing the carriage
assembly, hold the rear bushing on the carriage assembly.
5. Remove the carriage assembly (item 4) by sliding it off the slider rods.
6. Remove the Y-axis belt (item 5) from underneath the carriage assembly.
Seitenansicht 262
1 2 ... 258 259 260 261 262 263 264 265 266 267 268 ... 347 348

Kommentare zu diesen Handbüchern

Keine Kommentare