Hp ProLiant DL380 G5 Server Bedienungsanleitung Seite 67
- Seite / 98
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
NOTE: If the current data transfer width is Narrow (8 bits) then the speed in megabytes per second is equal to
the million transfers per second speed. If the current width is Wide (16 bits) then the speed in megabytes per
second is twice the million transfers per second speed. For example, if the current speed is Ultra and the width
is Wide then the speed would be 40 megabytes per second.
System Configuration
Auto Recovery
This section provides Automatic Server Recovery (ASR) configuration information, tells you when the server was last
reset, and allows you to modify pager settings. You can modify the Status, ASR Reset Boot Option, Pager Status,
Pager Dial String, and Pager Message settings.
The following items display on this window:
General Information
• ASR Condition—This value specifies the overall condition of the ASR. The following values are possible:
• Other—ASR is not supported on server.
• OK—Last reboot was not an ASR reboot.
• Degraded—Last reboot was an ASR reboot but the ASR reset count less than the ASR reset limit.
• Failed—ASR reset count is greater than or equal to the ASR reset limit.
• Status—Displays the status of ASR. The following values are possible:
• Enabled—ASR is enabled for this server.
• Disabled—ASR is disabled for this server. To change this status, run the System Configuration Utility or
perform a set on this item.
• Not Available—ASR is not available for this server or your driver is not loaded. ASR is available only on
operating systems using the ASR software support provided by HP/Compaq.
• Unknown—You may need to upgrade your support software and/or Server Agent(s). The Server Agent
cannot determine the status.
• Last Reset—Displays how the last server reset was performed. The following values are possible:
• ASR—The last reset was performed by ASR. Check the Critical Error Log to determine what may have
caused ASR.
• ASR-Cleared—The last reset was performed by ASR. The degraded condition caused by the ASR reset has
been cleared. Degraded ASR conditions can be cleared by selecting the Clear ASR button on the Auto
Server Recovery window.
• Manual—The last reset was performed manually.
• Unknown—You may need to upgrade your driver software and/or Server Agents. The Server Agent cannot
determine the status of the device.
If the last reset was an ASR reset, the ASR condition is degraded.
• Timeout—Displays how many minutes ASR waits before initiating a recovery process. ASR depends on the
software support to routinely notify the ASR hardware that the server is operating properly.
To change the timeout setting, use the System Configuration Utility. The time you specify for this field should be
a prudent period of time before resetting the system and activating the recovery process after a fault occurs. If
the timeout period is set too low on a heavily utilized server, the timeout could occur before the software support
has time to service the timer.
• ASR Hardware Version—Displays the version of the hardware supporting ASR. Use this information for
identification purposes.
Reboot
• Reset Boot Option—Displays what the server will boot after an ASR reset occurs. When the recovery process is
initiated, ASR resets the server, test all memory, de-allocate any bad memory blocks, and page you (if modem is
present in the server and paging is enabled).
• ASR Reset Limit—Displays the number of consecutive times that ASR attempts recovery. The Automatic Server
Recovery (ASR) feature can restart a server after a critical hardware or software error occurs. ASR attempts the
recovery process a limited number of consecutive times. You cannot change this number. If the server continues
to experience hardware or software errors and the number of recovery cycles exceeds this limit, the server logs
an error to the Critical Error Log, and then continues to boot the Utilities from the hard drive.
Agent information 67
- HP Insight Management Agents 1
- Contents 3
- Contents 4 4
- Browser requirements 5
- Obtaining JVM from Microsoft 6
- Obtaining JVM from Sun 6
- Introduction 8
- Overview 8
- Logging in 9
- System Management Homepage 10
- Header frame 11
- Body frame 13
- Home tab 13
- Settings tab 15
- SNMP Webagent 16
- Security 17
- User Preferences 18
- UI Properties 18
- Tasks Tab 19
- Logs tab 19
- Webapps tab 19
- Support tab 20
- Help tab 20
- 2 Agent information 21
- System Agent 22
- Sub system Classification 23
- Cooling and temperature 24
- Agent information 25 25
- Agent information 26 26
- Memory Summary 27
- Memory Details 27
- Processors 28
- PCI Devices 28
- Management Processor 29
- Battery 30
- Modem/COM Port Settings 30
- Operating System 31
- Logical Disk Space 32
- Server 33
- Agent information 34 34
- Network 35
- Processes 35
- Processor Utilization 36
- Agent information 37 37
- Agent information 38 38
- Agent information 39 39
- Identify Drives 40
- Physical Drive Information 41
- Agent information 42 42
- Logical Drive Information 43
- Predictive Indicators 44
- Problem Indicators 44
- Failure Indicators 45
- Statistics 46
- Agent information 48 48
- Identify Drive 49
- Associated Tape Drives 50
- Tape Drive Information 50
- Agent information 51 51
- Storage Systems 52
- Agent information 53 53
- IDE controllers 54
- IDE controller information 54
- IDE ATAPI devices 54
- IDE ATA disk drives 54
- Logical drives 55
- IDE ATA logical drives 55
- Physical drives 56
- Spare drives 56
- SCSI controllers 56
- Controller information 56
- SCSI device information 57
- Tape library 58
- Tape devices 59
- CD storage system 60
- CD Library Information 60
- CD-ROM drive information 61
- SCSI physical drives 62
- Drive indicators 63
- Drive statistics 64
- SCSI logical drives 65
- SCSI bus information 66
- System Configuration 67
- System Board 68
- Advanced Memory Protection 69
- Agent information 70 70
- ROM Microcode Patches 71
- General I/O Devices 71
- System Resources 72
- System Summery 72
- Enclosure Information 73
- Agent information 74 74
- Agent information 75 75
- Critical Error Log 76
- Agent information 77 77
- Correctable errors 78
- Power-On Messages 78
- Integrated Management Log 78
- Operating system overview 79
- Summary page 79
- File System page 80
- User Information page 80
- Connection page 81
- Loaded NLMs page 81
- Server Parameter page 82
- Physical Partition page 82
- Adapter Information page 83
- Mass storage RAID Array 84
- Mass Storage Physical 84
- Mass Storage controller 85
- Mass Storage Summary 85
- Environment Monitoring Unit 85
- External Expansion Cabinet 86
- Telephone numbers 87
- Appendix A Troubleshooting 88
- SNMP community string issues 90
- issues 90
- Insight Manager issues 91
- Other problems 93
- Glossary 95
- Glossary 96 96
Verwandte Produkte und Handbücher für Computerhardware Hp ProLiant DL380 G5 Server
(74 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.094 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern