Hp ProLiant DL380 G5 Server Bedienungsanleitung Seite 66
- Seite / 98
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Spare drives
A list of spare drives that can be used by this logical drive to replace a failed drive. Select one of the listed spare
drives to see more information about the drive.
SCSI bus information
Select a SCSI device from the SCSI controller submenu to display more information about the device. The following
information might appear depending on the type of device:
• Parity Errors—Displays the number of parity errors that occurred on the SCSI bus while the bus was processing
commands. The error count is kept from the time the SCSI Hardware Interface Driver was loaded.
Parity errors might occasionally occur over time. If this number rises dramatically, and you suspect a problem,
complete the following steps:
a. Ensure that the cables are not damaged and that they are intact and properly shielded from possible RFI.
b. Ensure that all required terminating resistors on all devices on the SCSI bus are present.
c. Ensure that each device on the SCSI bus has a unique SCSI ID.
• Phase Errors—Displays the number of times the SCSI bus entered an invalid operating state while processing
commands. The number of errors is counted from the time the SCSI Hardware Interface Driver was loaded.
If you see any phase errors, the device might have a problem. Phase errors can be caused by a device that is
not operating correctly. If the phase errors continue to increase, replace the device.
• Select Timeouts—Displays the number of times the controller attempted to start communications with a device
and received no response from the device. The number of errors is counted from the time the SCSI Hardware
Interface Driver was loaded.
The number of select timeouts should always be 0. Any other number of timeouts might indicate a problem with
the device. The SCSI controller attempts to reset the device, but if the value continues to increase, power cycle
the device.
A large number for this item does not indicate a problem. It shows that the device does not support certain
advanced SCSI commands that the device driver issued.
• Message Rejects—Displays the number of times the device rejected a command because the device does not
support the specific operation. The number of errors is counted since the SCSI Hardware Interface Driver was
loaded.
• Physical Width—Displays the actual width of the data transfer bus for this device. The following values are
valid:
• Narrow (8 bits)—The device supports a narrow 8-bit data transfer bus.
• Wide (16 bits)—The device supports a wide 16-bit data transfer bus.
• Unknown—The Storage Agents are unable to determine the physical data transfer width for this device.
• Current Width—Displays the width of the data transfer bus that was negotiated between the controller and the
device. If this value is less than the device physical data bus width, the device will not provide maximum
performance. Maximum throughput is achieved when both the SCSI controller and device support a wide 16-bit
data bus. The following values are valid:
• Narrow (8 bits)—The negotiated data bus transfer width is narrow (8 data bits).
• Wide (16 bits)
—The negotiated data bus transfer width is wide (16 data bits).
• Unknown—The Storage Agents are unable to determine the current data transfer width negotiated for this
device.
• Current Speed—Displays the current negotiated data transfer speed for this device. The following values are
valid:
• Asynchronous—The negotiated data transfer speed for this device is asynchronous.
• SCSI-1—The negotiated data transfer speed for this device is 5 million transfers per second.
• Fast—The negotiated data transfer speed for this device is 10 million transfers per second.
• Ultra—The negotiated data transfer speed for this device is 20 million transfers per second.
• Ultra2—The negotiated data transfer speed for this device is 40 million transfers per second.
• Ultra3—The negotiated data transfer speed for this device is 80 million transfers per second.
• Ultra320—The negotiated data transfer speed for this device is 160 million transfers per second.
• Unknown—The agent is unable to determine the current negotiated data transfer speed for this device.
Agent information 66
- HP Insight Management Agents 1
- Contents 3
- Contents 4 4
- Browser requirements 5
- Obtaining JVM from Microsoft 6
- Obtaining JVM from Sun 6
- Introduction 8
- Overview 8
- Logging in 9
- System Management Homepage 10
- Header frame 11
- Body frame 13
- Home tab 13
- Settings tab 15
- SNMP Webagent 16
- Security 17
- User Preferences 18
- UI Properties 18
- Tasks Tab 19
- Logs tab 19
- Webapps tab 19
- Support tab 20
- Help tab 20
- 2 Agent information 21
- System Agent 22
- Sub system Classification 23
- Cooling and temperature 24
- Agent information 25 25
- Agent information 26 26
- Memory Summary 27
- Memory Details 27
- Processors 28
- PCI Devices 28
- Management Processor 29
- Battery 30
- Modem/COM Port Settings 30
- Operating System 31
- Logical Disk Space 32
- Server 33
- Agent information 34 34
- Network 35
- Processes 35
- Processor Utilization 36
- Agent information 37 37
- Agent information 38 38
- Agent information 39 39
- Identify Drives 40
- Physical Drive Information 41
- Agent information 42 42
- Logical Drive Information 43
- Predictive Indicators 44
- Problem Indicators 44
- Failure Indicators 45
- Statistics 46
- Agent information 48 48
- Identify Drive 49
- Associated Tape Drives 50
- Tape Drive Information 50
- Agent information 51 51
- Storage Systems 52
- Agent information 53 53
- IDE controllers 54
- IDE controller information 54
- IDE ATAPI devices 54
- IDE ATA disk drives 54
- Logical drives 55
- IDE ATA logical drives 55
- Physical drives 56
- Spare drives 56
- SCSI controllers 56
- Controller information 56
- SCSI device information 57
- Tape library 58
- Tape devices 59
- CD storage system 60
- CD Library Information 60
- CD-ROM drive information 61
- SCSI physical drives 62
- Drive indicators 63
- Drive statistics 64
- SCSI logical drives 65
- SCSI bus information 66
- System Configuration 67
- System Board 68
- Advanced Memory Protection 69
- Agent information 70 70
- ROM Microcode Patches 71
- General I/O Devices 71
- System Resources 72
- System Summery 72
- Enclosure Information 73
- Agent information 74 74
- Agent information 75 75
- Critical Error Log 76
- Agent information 77 77
- Correctable errors 78
- Power-On Messages 78
- Integrated Management Log 78
- Operating system overview 79
- Summary page 79
- File System page 80
- User Information page 80
- Connection page 81
- Loaded NLMs page 81
- Server Parameter page 82
- Physical Partition page 82
- Adapter Information page 83
- Mass storage RAID Array 84
- Mass Storage Physical 84
- Mass Storage controller 85
- Mass Storage Summary 85
- Environment Monitoring Unit 85
- External Expansion Cabinet 86
- Telephone numbers 87
- Appendix A Troubleshooting 88
- SNMP community string issues 90
- issues 90
- Insight Manager issues 91
- Other problems 93
- Glossary 95
- Glossary 96 96
Verwandte Produkte und Handbücher für Computerhardware Hp ProLiant DL380 G5 Server
(74 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.616 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern