Hp ProLiant DL380 G5 Server Bedienungsanleitung Seite 52
- Seite / 98
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
• Tape Errors—Displays the total number of read and write errors encountered. This value is maintained from the
moment the Tape Hardware Interface driver was loaded.
Tape errors may occasionally occur. If this value rises dramatically, clean the device. If you continue to have
errors, you may have a problem. Some common causes of these errors include radio frequency interference
(RFI) on the bus cables, bad or missing terminating resistors on the drives, or having more than one device with
the same SCSI ID. Ensure the bus cable is free of obstructions and that the devices on the bus are properly
configured.
• Uncorrectable—isplays the total number of read and write errors which could not be corrected. This value is
maintained from the moment the Tape Hardware Interface driver was loaded.
Uncorrectable errors may occasionally occur. If this value rises dramatically, clean the device. If you continue to
have errors, you may have a problem. Some common causes include radio frequency interference (RFI) on the
bus cables, bad or missing terminating resistors on the drives, or having more than one device with the same
SCSI ID. Ensure the bus cable is free of obstructions and that the devices on the bus are properly configured.
• Rereads—Displays the number of times blocks that had to be reread from the device. This value is maintained
from the moment the Tape Hardware Interface driver was loaded.
Reread errors may occasionally occur. If this value rises dramatically, clean the device. If you continue to have
rereads, you may have a problem. Some common causes include radio frequency interference (RFI) on the bus
cables, bad or missing terminating resistors on the drives or having more than one device with the same SCSI
ID. Ensure the bus cable is free of obstructions and that the devices on the bus are properly configured.
• Rewrites—Displays the number of times blocks that had to be rewritten to the device. This value is maintained
since the Tape Hardware Interface driver was loaded.
Rewrite errors may occasionally occur. If this value should rise dramatically, you may need to clean the device.
If you continue to have rewrites, you may have a problem. Some common causes include radio frequency
interference (RFI) on the bus cables, bad or missing terminating resistors on the drives, or having more than one
device with the same SCSI ID. Ensure the bus cable is free of obstructions and that the devices on the bus are
properly configured.
• Total bytes—Displays the cumulative total number of bytes the tape drive has processed.
• Tape Drive Heads Need Cleaning—Indicates whether the tape drive need to be cleaned. To clean the tape
heads, insert a cleaning tape into the drive and run through a cleaning cycle. The following values are valid:
• Yes—The tape drive requires a cleaning tape session in order to clean the heads.
• No—The tape drive does not require any cleaning tape session.
• Not Supported—The tape drive does not support monitoring of the cleaning required status.
• Cleaning Tape Needs Replacement—Indicates whether the cleaning tape that is inserted in an autoloader needs
to be replaced because its cleaning capability is exhausted (it is at the end of the tape). This variable can be in
one of the following states:
•
Yes—The autoloader tape drive requires a new cleaning tape to be inserted.
• No—The tape drive does not require a new cleaning tape.
• Not Supported—The tape drive does not support monitoring of the cleaning tape replacement status.
NOTE: This variable is only applicable to autoloader tape drives.
Storage Systems
For more information on storage systems, see the product information on the HP website https://www.hp.com.
Storage system information is listed below:
• Box Type—Displays the type of drive enclosure, or box. The following types are possible:
• External Storage System—Outside the machine
• Internal Storage System—Inside the machine
• Unknown—The Storage Agents do not recognize the drive enclosure. You may need to upgrade your software.
• Vendor—Displays the name of the vendor that produces this drive enclosure, or box type. Use this information
for identification purposes.
• Firmware Revision—Displays the firmware revision of the drive enclosure or box. Use this information for
identification purposes.
• Serial Number—Displays the serial number of the drive enclosure or box. Use this information for identification
purposes.
Agent information 52
- HP Insight Management Agents 1
- Contents 3
- Contents 4 4
- Browser requirements 5
- Obtaining JVM from Microsoft 6
- Obtaining JVM from Sun 6
- Introduction 8
- Overview 8
- Logging in 9
- System Management Homepage 10
- Header frame 11
- Body frame 13
- Home tab 13
- Settings tab 15
- SNMP Webagent 16
- Security 17
- User Preferences 18
- UI Properties 18
- Tasks Tab 19
- Logs tab 19
- Webapps tab 19
- Support tab 20
- Help tab 20
- 2 Agent information 21
- System Agent 22
- Sub system Classification 23
- Cooling and temperature 24
- Agent information 25 25
- Agent information 26 26
- Memory Summary 27
- Memory Details 27
- Processors 28
- PCI Devices 28
- Management Processor 29
- Battery 30
- Modem/COM Port Settings 30
- Operating System 31
- Logical Disk Space 32
- Server 33
- Agent information 34 34
- Network 35
- Processes 35
- Processor Utilization 36
- Agent information 37 37
- Agent information 38 38
- Agent information 39 39
- Identify Drives 40
- Physical Drive Information 41
- Agent information 42 42
- Logical Drive Information 43
- Predictive Indicators 44
- Problem Indicators 44
- Failure Indicators 45
- Statistics 46
- Agent information 48 48
- Identify Drive 49
- Associated Tape Drives 50
- Tape Drive Information 50
- Agent information 51 51
- Storage Systems 52
- Agent information 53 53
- IDE controllers 54
- IDE controller information 54
- IDE ATAPI devices 54
- IDE ATA disk drives 54
- Logical drives 55
- IDE ATA logical drives 55
- Physical drives 56
- Spare drives 56
- SCSI controllers 56
- Controller information 56
- SCSI device information 57
- Tape library 58
- Tape devices 59
- CD storage system 60
- CD Library Information 60
- CD-ROM drive information 61
- SCSI physical drives 62
- Drive indicators 63
- Drive statistics 64
- SCSI logical drives 65
- SCSI bus information 66
- System Configuration 67
- System Board 68
- Advanced Memory Protection 69
- Agent information 70 70
- ROM Microcode Patches 71
- General I/O Devices 71
- System Resources 72
- System Summery 72
- Enclosure Information 73
- Agent information 74 74
- Agent information 75 75
- Critical Error Log 76
- Agent information 77 77
- Correctable errors 78
- Power-On Messages 78
- Integrated Management Log 78
- Operating system overview 79
- Summary page 79
- File System page 80
- User Information page 80
- Connection page 81
- Loaded NLMs page 81
- Server Parameter page 82
- Physical Partition page 82
- Adapter Information page 83
- Mass storage RAID Array 84
- Mass Storage Physical 84
- Mass Storage controller 85
- Mass Storage Summary 85
- Environment Monitoring Unit 85
- External Expansion Cabinet 86
- Telephone numbers 87
- Appendix A Troubleshooting 88
- SNMP community string issues 90
- issues 90
- Insight Manager issues 91
- Other problems 93
- Glossary 95
- Glossary 96 96
Verwandte Produkte und Handbücher für Computerhardware Hp ProLiant DL380 G5 Server
(74 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.380 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern