Hp ProLiant DL380 G5 Server Bedienungsanleitung Seite 30
- Seite / 98
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
• Pending Alarm—Displays if the alert is unable to determine the state of the iLO, or if all alerts have been
delivered or if there are alerts pending that still need to be sent.
If your system supports the Integrated Lights-Out Edition, the following alerts are available:
• Remote Insight Alerts—Allow users to enable or disable the alerts by clicking the button.
• Host Alerts allow users to enable or disable the alerts by clicking the button.
• Pending Alarm—Displays if the alert is unable to determine the state of the Remote Insight, or if all alerts have
been delivered or if there are alerts pending that still need to be sent
Battery
• Battery Status—Indicates the status of the Remote Insight board battery. When the Remote Insight board battery
is enabled and there is a host power failure, the Remote Insight board battery provides a minimum of 30
minutes of operation. This enables the Remote Insight board to send alerts to the users that were specified
during configuration.
• Battery Condition—Displays the condition of the battery. The following values are possible:
• OK—The battery is charged and functional.
• Failed—The battery needs to be replaced.
• Disconnected—The battery has been disconnected.
• Battery Charge—Displays the percentage of the charge in the Remote Insight board battery.
Power
• Auxiliary Power—Displays whether or not the auxiliary power (External Power Cable and/or Internal Power
Cable, which is a 30-pin cable or a 16-pin cable) is connected to the Remote Insight.
• Virtual Power Button—Displays whether or not the virtual power button cable is connected to the Remote Insight.
Modem/COM Port Settings
NOTE: The Modem/COM Port Settings is not supported for Integrated Lights-Out Edition or The Remote Insight Lights Out
Edition.
A series of tables is displayed providing information about any Remote Insight Board modems or communication
ports. The first table title indicates the type of device described like "Internal Modem", "External Port", "External
Modem", "External Direct Connect," or "External XonXoff". The tables may contain the following:
• Model—Displays the model of the communication device.
• Data Settings—This table contains the data settings for the communication device including:
• Alarms—Displays if the Remote Insight firmware uses this communication device to deliver traps.
• Non-PPP—Displays if non-PPP connections are allowed on this port.
• Baud Rate—Displays the baud rate to be used on this port.
• Data Bits—Displays the number of data bits to be used on this port.
• Stop Bits—Displays the number of stop bits to be used on this port.
• Parity—Displays the type of parity to be used on this port.
• Pager Settings—Displays pager settings for the communication device.
• Alarms—Displays if the Remote Insight Board firmware uses this port to deliver pages.
• Message—Displays the message that appears in the body of the page.
• Baud Rate—Displays the baud rate to use for pager messages.
• Data Bits—Displays the number of data bits to user for pager messages.
• Stop Bits—Displays the number of stop bits to use for pager messages.
• Parity—Displays the type of parity to user for pager messages.
• Modem Control Strings—This table contains the modem control strings for the communication device including
the following:
• Reset—Displays the string used to reset the modem.
• Initialize—Displays the string used to initialize the modem.
• Dial Prefix —Displays the string pre-pended to phone numbers before dialing.
Agent information 30
- HP Insight Management Agents 1
- Contents 3
- Contents 4 4
- Browser requirements 5
- Obtaining JVM from Microsoft 6
- Obtaining JVM from Sun 6
- Introduction 8
- Overview 8
- Logging in 9
- System Management Homepage 10
- Header frame 11
- Body frame 13
- Home tab 13
- Settings tab 15
- SNMP Webagent 16
- Security 17
- User Preferences 18
- UI Properties 18
- Tasks Tab 19
- Logs tab 19
- Webapps tab 19
- Support tab 20
- Help tab 20
- 2 Agent information 21
- System Agent 22
- Sub system Classification 23
- Cooling and temperature 24
- Agent information 25 25
- Agent information 26 26
- Memory Summary 27
- Memory Details 27
- Processors 28
- PCI Devices 28
- Management Processor 29
- Battery 30
- Modem/COM Port Settings 30
- Operating System 31
- Logical Disk Space 32
- Server 33
- Agent information 34 34
- Network 35
- Processes 35
- Processor Utilization 36
- Agent information 37 37
- Agent information 38 38
- Agent information 39 39
- Identify Drives 40
- Physical Drive Information 41
- Agent information 42 42
- Logical Drive Information 43
- Predictive Indicators 44
- Problem Indicators 44
- Failure Indicators 45
- Statistics 46
- Agent information 48 48
- Identify Drive 49
- Associated Tape Drives 50
- Tape Drive Information 50
- Agent information 51 51
- Storage Systems 52
- Agent information 53 53
- IDE controllers 54
- IDE controller information 54
- IDE ATAPI devices 54
- IDE ATA disk drives 54
- Logical drives 55
- IDE ATA logical drives 55
- Physical drives 56
- Spare drives 56
- SCSI controllers 56
- Controller information 56
- SCSI device information 57
- Tape library 58
- Tape devices 59
- CD storage system 60
- CD Library Information 60
- CD-ROM drive information 61
- SCSI physical drives 62
- Drive indicators 63
- Drive statistics 64
- SCSI logical drives 65
- SCSI bus information 66
- System Configuration 67
- System Board 68
- Advanced Memory Protection 69
- Agent information 70 70
- ROM Microcode Patches 71
- General I/O Devices 71
- System Resources 72
- System Summery 72
- Enclosure Information 73
- Agent information 74 74
- Agent information 75 75
- Critical Error Log 76
- Agent information 77 77
- Correctable errors 78
- Power-On Messages 78
- Integrated Management Log 78
- Operating system overview 79
- Summary page 79
- File System page 80
- User Information page 80
- Connection page 81
- Loaded NLMs page 81
- Server Parameter page 82
- Physical Partition page 82
- Adapter Information page 83
- Mass storage RAID Array 84
- Mass Storage Physical 84
- Mass Storage controller 85
- Mass Storage Summary 85
- Environment Monitoring Unit 85
- External Expansion Cabinet 86
- Telephone numbers 87
- Appendix A Troubleshooting 88
- SNMP community string issues 90
- issues 90
- Insight Manager issues 91
- Other problems 93
- Glossary 95
- Glossary 96 96
Verwandte Produkte und Handbücher für Computerhardware Hp ProLiant DL380 G5 Server
(74 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.448 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern