HP X Unified Security Platform Series Bedienungsanleitung PDF herunterladen (Seite 49)

IPS Digital Vaccine (DV) Filters

X Family LSM User’s Guide V 2.5.1 33

On the View Filter page, you can also add or remove the filter from Security Profiles using the

check boxes in the Security Profiles table. After making changes, click Save.

STEP 6

In the Filters List table, select the filter or filters to edit:

• To select a single filter, click to add the filter to the Security Profile.

• To select multiple filters, select the check box for each filter. Then, click the Add Selected

Filters button at the bottom of the Filters page.

The Security Profiles page displays with the selected filters in the Advanced Options - Filters

table as shown in the following figure.

STEP 7

To edit the filter settings, click the filter name, or the pencil icon.

STEP 8

On the Edit Filter page in the Action/State section, select Use Category Settings or Over-

ride. If you select Override to use a different action set for the filter, do the following:

STEP A

Select the Override radio button in the Parameters section.

STEP B

Check Enabled to enable the filter, or clear the check box if you want to disable the

filter.

STEP C

Choose an Action from the drop-down list.

If the action for the filter is Recommended and you do not change it, the filter may

remain disabled even when you select the Enabled check box. This happens

because the recommended setting for the filter state is disabled. To enable a filter

configured in this manner, you must change the action from Recommended to

another option.

STEP 9

Optionally, set adaptive filter settings for flow control. In the Adaptive Filter Configuration

State section, select one of the following:

• Use adaptive configuration settings — Applies the global adaptive filter settings

• Do not apply adaptive configuration settings to this filter — Removes any global

adaptive filter settings for this filter

STEP 10

Optionally, define IP address exceptions for the filter. For details, see “Configure Filter Limits/

Exceptions based on IP Address” on page 34.

STEP 11

Click Save.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 332 333

Keine Kommentare

HP X Unified Security Platform Series Bedienungsanleitung Seite 49