HP X Unified Security Platform Series Bedienungsanleitung Seite 247

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 333
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 246
Time Options
X Family LSM User’s Guide V 2.5.1 231
Internal CMOS Clock
Set the Internal CMOS Clock Time
STEP 1
From the LSM, select System > Configuration > Time Options.
STEP 2
On the Time Options page in the Clock Source table, click Internal CMOS clock.
STEP 3
To automatically populate the date and time settings, click Set Time to Local Browser Time.
OR
Type the CMOS Date and Time in the formats specified next to the fields.
STEP 4
Click Apply.
NTP Server
To synchronize the system time on the X family device with an external time server (NTP server),
select NTP as the clock source for your device. Using an NTP server, the device synchronizes time with
the NTP server which allows the timing of network events on different hosts to be compared more
accurately.
The following table provides information on the NTP protocol configuration parameters.
TIP
To ensure that events times from different network entities can be
meaningfully compared, configure the same NTP clients for the X family device
and other network devices.
CAUTION Using external NTP servers could possibly make your device susceptible to a
man-in-the-middle attack. It is more secure to use an NTP server on a local, protected
network.
Parameter Description
Duration Interval at which the X family device will check with the time server. A
zero value will cause time to be checked once on boot.
Offset If the difference between the new time and the current time is equal to or
greater than the offset, the new time is accepted by the device. A zero
value will force time to change every time the device checks.
Fast Sync If this field is set to 1, the X family device is allowed to trust the NTP
server after the first time query. This sets the local time on the device
immediately, but there is a risk that the set time will be incorrect. To
disable this option, set this value to 0.
Server Host, Port The IP address and Port for the NTP server
Peer Host, Port
Seitenansicht 246
1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 332 333

Kommentare zu diesen Handbüchern

Keine Kommentare