HP X Unified Security Platform Series Bedienungsanleitung PDF herunterladen (Seite 148)

Chapter 6 Network

132 X Family LSM User’s Guide V 2.5.1

IP addresses, respectively. The LAN security zone is in one broadcast domain while the DMZ and

WAN zones are in another.

• Bridge — In this mode, the device acts as a bridge to transparently connect security zones assigned

to the same virtual interface. You do not have to configure IP routes to bridge traffic. When in bridge

mode, the device learns MAC addresses on ports, and forwards traffic within the transparent virtual

interface by destination MAC address to the appropriate port. If the address is unknown, the device

forwards the packet to all ports. The device does not forward spanning tree packets. It still operates

normally as a router and VPN terminator

• Full routed/NAT — In this mode, all security zones have unique IP addresses and addresses going

to the WAN zone may be NAT’ed. Each security zone is in a separate broadcast domain.

For more detailed information and examples of deployment modes, refer to the Concepts Guide.

Network Port Configuration

Use the Network Port Configuration page to configure and manage the ports on the device. From this

page you can complete the following tasks:

• Edit port configuration

• Restart a port

• Disable a port

Figure 6–2: X Family Transparent DMZ - NAT/Routed LAN Deployment Mode

Figure 6–3: X Family Full Routed/NAT Deployment Mode

TIP

You can view the current status and port configuration

from the Port Health page (Events > Health > Port Health).

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 332 333

Keine Kommentare

HP X Unified Security Platform Series Bedienungsanleitung Seite 148