
Chapter 6 Network
134 X Family LSM User’s Guide V 2.5.1
Edit Port Configuration
STEP 1
From the LSM menu, select Network > Configuration > Network Ports.
STEP 2
On the Port Configuration page, clear the Auto Negotiation checkbox for the port you want
to configure.
The page updates to show configuration fields for Line Speed and Duplex Setting.
STEP 3
Select the Line Speed setting from the drop-down menu.
STEP 4
Select the Duplex setting: Full or Half.
STEP 5
Check the Restart checkbox.
STEP 6
Click Apply to save the configuration and restart the port.
Disable a Port
STEP 1
From the LSM menu, select Network > Configuration > Network Ports.
STEP 2
On the Port Configuration page, clear the Port Enabled checkbox.
STEP 3
Check the Restart checkbox.
STEP 4
Click Apply to save the configuration and restart the port.
Restart a Port
STEP 1
From the LSM menu, select Network > Configuration > Network Ports.
STEP 2
On the Port Configuration page, check the Restart checkbox.
STEP 3
Click Apply to save the configuration and restart the port.
Troubleshoot Port Link-Down errors
If the X family device indicates that the ports are unable to establish link, check the connections on the
device. If you use a copper-fiber translator (such as Netgear) and it is disconnected or loose, the device
driver will attempt to re-initialize the port several times before timing out and placing the port in an
Out-of-Service mode.
Netgear does not support auto-negotiation. When you remove the copper cable or the cable is loose,
Netgear does not attempt to auto-negotiate with the device.
Correct a Port Link-Down Error
STEP 1
From the LSM menu, select Network > Configuration > Network Ports.
STEP 2
On the Port Configuration page, clear the Auto Negotiation checkbox for the port that is not
working.
STEP 3
Click the Restart checkbox. Then, click Apply to restart the port.
Kommentare zu diesen Handbüchern