Hp Officejet J5740 All-in-One Printer Bedienungsanleitung PDF herunterladen (Seite 149)

4. Insert the stack of paper into the input tray with the short edge forward and the

print side down. Slide the stack of paper forward until it stops.

CAUTION: Make sure that the HP All-in-One is idle and silent when you load

paper into the input tray. If the HP All-in-One is servicing the print cartridges

or otherwise engaged in a task, the paper stop inside the device might not be

in place. You could push the paper too far forward, causing the HP All-in-One

to eject blank pages.

TIP: If you are using letterhead, insert the top of the page first with the print

side down. For more help on loading full-size paper and letterhead, refer to

the diagram engraved in the base of the input tray.

5. Slide the paper-width guide inward until it stops at the edge of the paper.

Do not overload the input tray; make sure the stack of paper fits within the input

tray and is no higher than the top of the paper-width guide.

6. Replace the output tray.

Print quality troubleshooting 147

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 295 296

Keine Kommentare

Hp Officejet J5740 All-in-One Printer Bedienungsanleitung Seite 149