Hp Hitachi Dynamic Link Manager Software Bedienungsanleitung Seite 331

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 746
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 330
3. Creating an HDLM Environment
307
Figure 3-40: Device Configuration When an md Device on an HDLM Device Is
Moved to a SCSI Device (An Environment that Uses the md Device's
MULTIPATH Functionality)
To migrate
/dev/md0:
1. Deactivate the md device.
Perform steps 3 to 5 in (1) Migrating to md Devices for which the MULTIPATH
Function Is Not Used.
2. Check the status of the md device.
Execute the following command to check the configuration of the md device:
# cat /proc/mdstat
Personalities : [linear]
md0 : active linear sddlmaa1[0]
5238528 blocks [2/2] [UU]
unused devices: <none>
Make sure that md0 : active and the HDLM devices are displayed:
3. Execute the following command to deactivate the md device:
# mdadm -Ss /dev/md0
4. Make sure that the md device has been deactivated.
In the following example, the
LINEAR function is used for the md device:
Seitenansicht 330
1 2 ... 326 327 328 329 330 331 332 333 334 335 336 ... 745 746

Kommentare zu diesen Handbüchern

Keine Kommentare