Hp Hitachi Dynamic Link Manager Software Bedienungsanleitung Seite 220

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 746
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 219
3. Creating an HDLM Environment
196
When GRUB is used as the boot loader:
Root directory (
/), /boot, /tmp, /usr, /var, swap
When LILO is used as the boot loader:
Root directory (
/), /tmp, /usr, /var, swap
Comment out the existing SCSI device specification by placing a hash mark (#)
at the beginning of each line, and then add the HDLM device specification as
shown below, based on the correspondence between the SCSI device and the
HDLM device as checked in step 17.
:
:
#/dev/sddlmaa2 / ext2 defaults 1 1
#
/dev/sda2 / ext2 defaults 1 1
/dev/sddlmaa2 / ext2 defaults 1 1
:
:
#/dev/sddlmaa4 /tmp ext2 defaults 1 2
#
/dev/sda4 /tmp ext2 defaults 1 2
/dev/sddlmaa4 /tmp ext2 defaults 1 2
:
:
26. Shut down the host.
Execute the following command to shut down the host:
# shutdown -h now
27. Change the configuration from a single-path configuration to a multi-path
configuration.
28. Start the host.
29. Execute the
mount command to make sure that the HDLM device is mounted.
The following shows an execution example for when
GRUB is used as the boot
loader:
# mount
/dev/sddlmaa2 on /
type ext2 (rw)
:
:
/dev/sddlmaa1 on /boot
type ext2 (rw)
/dev/sddlmaa4 on /tmp
type ext2 (rw)
/dev/sddlmaa5 on /var
type ext2 (rw)
Seitenansicht 219
1 2 ... 215 216 217 218 219 220 221 222 223 224 225 ... 745 746

Kommentare zu diesen Handbüchern

Keine Kommentare