HP 7000 dl Router Series Betriebsanweisung PDF herunterladen (Seite 839)

100

101

SROS Command Line Interface Reference Guide HDLC Command Set

ip route-cache

Use the ip route-cache command to enable fast-cache switching on the interface. Use the no form of this

command to disable fast-cache switching and return to process switching mode.

Syntax Description

No subcommands.

Default Values

By default, fast-cache switching is enabled on all Ethernet and virtual Frame Relay sub-interfaces. IP

route-cache is enabled for all virtual PPP interfaces.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual

HDLC interfaces (hdlc 1), virtual Frame Relay sub-interfaces (fr 1.20), tunnel

interfaces (tunnel 1), and VLAN interface (vlan 1).

Functional Notes

Fast switching allows an IP interface to provide optimum performance when processing IP traffic.

Usage Examples

The following example enables fast switching on the HDLC interface:

(config)#interface hdlc 1

(config-hdlc 1)#ip route-cache

Using Network Address Translation (NAT) or the SROS firewall capabilities on an

interface requires process switching mode (using the no ip route-cache command).

1 2 ... 834 835 836 837 838 839 840 841 842 843 844 ... 940 941

Kommentare zu diesen Handbüchern

Keine Kommentare

HP 7000 dl Router Series Betriebsanweisung Seite 839

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung HP 7000 dl Router Series