HP 7000 dl Router Series Betriebsanweisung PDF herunterladen (Seite 513)

SROS Command Line Interface Reference Guide T1 Interface Configuration Command Set

loopback remote payload

Use the loopback remote payload command to send a loopback code to the remote unit to initiate a

payload loopback. A payload loopback is a 1.536 Mbps loopback of the payload data received from the

network maintaining bit-sequence integrity for the information bits by synchronizing (regenerating) the

timing. Use the no form of this command to send a loopdown code to the remote unit to deactivate the

Syntax Description

No subcommands.

Default Values

No defaults necessary for this command.

Command Modes

(config-t1 1/1)# T1 or DSX-1 Interface Configuration Mode required.

(config-t1 1/2)#

Functional Notes

The following diagram depicts the difference between a line and payload loopback.

Usage Examples

The following example initiates a remote payload loopback:

(config)#interface t1 1/1

(config-t1 1/1)#loopback remote payload

T1 Network Interface

Payload Loopback

Line Loopback

Keine Kommentare

HP 7000 dl Router Series Betriebsanweisung Seite 513