HP 7000 dl Router Series Betriebsanweisung PDF herunterladen (Seite 485)

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

vlan-id <vlan id> [native]

Use the vlan-id command to set a VLAN ID for the Ethernet subinterface. Use the no form of this

command to remove an entry.

Syntax Description

<vlan id> Enter a valid VLAN interface ID number (1-4095).

native Optional.

Specifies that data for that VLAN ID goes out untagged. If

specified, data for that VLAN ID goes out tagged.

Default Values

By default, no VLAN ID is set.

Command Modes

Ethernet Interface Configuration Modes

Usage Examples

The following example configures a native VLAN of 5 for the Ethernet sub-interface:

(config-eth 0/1.1)#vlan-id 5 native

Keine Kommentare

HP 7000 dl Router Series Betriebsanweisung Seite 485