HP 7000 dl Router Series Betriebsanweisung PDF herunterladen (Seite 673)

100

101

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set

ip address <address> <mask> secondary

Use the ip address command to define an IP address on the specified interface. Use the optional

secondary keyword to define a secondary IP address. Use the no form of this command to remove a

configured IP address.

Syntax Description

<address> Defines the IP address for the interface in dotted decimal notation (for example:

192.22.73.101).

<mask> Specifies the subnet mask that corresponds to the listed IP address.

secondary

Optional keyword used to configure a secondary IP address for the specified interface.

Default Values

By default, there are no assigned IP addresses.

Command Modes

(config-interface)# Interface Configuration Mode required.

Functional Notes

Use secondary IP addresses to allow dual subnets on a single interface (when you need more IP

addresses than the primary subnet can provide). When using secondary IP addresses, avoid routing loops

by verifying that all devices on the network segment are configured with secondary IP addresses on the

secondary subnet.

Usage Examples

The following example configures a secondary IP address of 192.22.72.101/30:

(config)#interface atm 1.1

(config-atm 1.1)#ip address 192.22.72.101 255.255.255.252 secondary

1 2 ... 668 669 670 671 672 673 674 675 676 677 678 ... 940 941

Kommentare zu diesen Handbüchern

Keine Kommentare

HP 7000 dl Router Series Betriebsanweisung Seite 673

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung HP 7000 dl Router Series