HP 7000 dl Router Series Betriebsanweisung PDF herunterladen (Seite 338)

100

101

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

snmp-server host <address> traps <community> <trap type>

Use the snmp-server host traps command to specify traps sent to an identified host. Use multiple

snmp-server host traps commands to specify all desired hosts. Use the no form of this command to return

to the default value.

Syntax Description

<address> Specifies the IP address of the SNMP host that receives the traps.

<community> Specifies the community string (used as a password) for authorized agents to

obtain access to SNMP information.

<trap type> Optional.

Specifies the type of notification trap to enable. Leaving this option blank

enables ALL system traps.

snmp Enables a subset of traps specified in RFC 1157.

The following traps are supported:

coldStart

warmStart

linkUp

linkDown

authenticationFailure

Default Values

By default, there are no hosts or traps enabled.

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example sends all SNMP traps to the host at address 190.3.44.69 and community string

My Community:

(config)#snmp-server host 190.3.44.69 traps My Community snmp

1 2 ... 333 334 335 336 337 338 339 340 341 342 343 ... 940 941

Kommentare zu diesen Handbüchern

Keine Kommentare

HP 7000 dl Router Series Betriebsanweisung Seite 338

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung HP 7000 dl Router Series