HP 7000 dl Router Series Betriebsanweisung PDF herunterladen (Seite 394)

SROS Command Line Interface Reference Guide IKE Client Command Set

ip-range <start ip> <end ip>

Use the ip-range command to specify the range of addresses from which the router draws when assigning

an IP address to a client.

Syntax Description

<start ip> The first IP address in the range for this pool.

<end ip> The last IP address in the range for this pool.

Default Values

By default, no IP address range is defined.

Command Modes

(config-ike-client-pool)# IKE Client Configuration Mode

Usage Examples

The following example defines an IP address range for this configuration pool:

(config-ike-client-pool)#ip-range 172.1.1.1 172.1.1.25

Keine Kommentare

HP 7000 dl Router Series Betriebsanweisung Seite 394