Hp ProLiant ML110 G7 Server Bedienungsanleitung Seite 38
- Seite / 113
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Hardware options installation 38
9.
Connect each power cord to the server.
10. Connect each power cord to the power source.
11. Power up the server (on page 19).
Storage controller option
IMPORTANT: For additional installation and configuration information, refer to the
documentation that ships with the option.
To install the component:
1. Power down the server (on page 19).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Unlock the tower bezel ("Unlock and open the tower bezel" on page 20).
4. Remove the access panel (on page 21).
5. Remove the drive cables.
6. Install the storage controller into slot 1.
For more information, see the documentation that ships with the option.
7. Connect the storage controller cable to the controller and to the drive.
For more information, see "Storage cabling (on page 60)."
8. Install the access panel (on page 21).
9. Lock the tower bezel.
10. Connect each power cord to the server.
11. Connect each power cord to the power source.
12. Power up the server (on page 19).
For more information about the controller and its features, see the HP Smart Array Controllers for HP ProLiant
Servers User Guide on the HP website (http://www.hp.com/support/SAC_UG_ProLiantServers_en). To
configure arrays, see the Configuring Arrays on HP Smart Array Controllers Reference Guide on the HP
website (http://www.hp.com/support/CASAC_RG_en).
Upgrade options exist for the integrated array controller. For a list of supported options, see the QuickSpecs
on the HP website (http://www.hp.com/support).
BBWC battery/FBWC capacitor pack and module
option
CAUTION: To prevent a server malfunction or damage to the equipment, do not add or remove
the battery pack while an array capacity expansion, RAID level migration, or stripe size migration
is in progress.
- HP ProLiant ML110 G7 Server 1
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Contents 6 6
- Component identification 7
- Rear panel components 8
- Rear panel LEDs and buttons 9
- System board components 10
- DIMM slot locations 11
- System maintenance switch 11
- System board LEDs 12
- NMI functionality 12
- SAS and SATA drive numbering 13
- SAS and SATA drive LEDs 14
- BBWC module LEDs 15
- FBWC module LEDs 17
- Fan locations 18
- Operations 19
- Remove the tower bezel 20
- Install the tower bezel 20
- Remove the access panel 21
- Install the access panel 21
- Remove the air baffle 22
- Install the air baffle 22
- Optimum environment 24
- Temperature requirements 25
- Power requirements 25
- Installing hardware options 26
- Setting up a tower server 26
- Setup 28 28
- Registering the server 29
- Introduction 30
- HP product QuickSpecs 30
- SAS and SATA drive options 30
- Drive cage options 32
- Drive LED cable option 37
- Storage controller option 38
- Optical drive option 42
- Memory options 45
- Memory configuration 46
- Installing a DIMM 47
- Expansion board options 48
- RPS enablement option 55
- 9. Install the RPS cage 57
- Cabling 60
- Hot-plug, SATA drive support 61
- Hot-plug, SAS drive support 61
- Eight-bay SFF drive cabling 62
- Optical drive cabling 63
- Power supply cabling 64
- Item Description 65
- Configuration and utilities 66
- Using RBSU 67
- Auto-configuration process 67
- Array Configuration Utility 68
- • Selecting the boot volume 69
- Management tools 70
- Diagnostic tools 71
- Integrated Management Log 72
- Keeping the system current 73
- ProLiant Support Packs 74
- Firmware 74
- HP Smart Update Manager 74
- Care Pack 75
- Troubleshooting 76
- Symbols on equipment 77
- Warnings and cautions 77
- Symptom information 78
- Loose connections 80
- Service notifications 81
- Server health LEDs 81
- Troubleshooting flowcharts 81
- General diagnosis flowchart 82
- Symptoms: 84
- Troubleshooting 86 86
- POST problems flowchart 87
- OS boot problems flowchart 89
- Troubleshooting 90 90
- • Redundancy failure 91
- (http://www.hp.com/support) 92
- Troubleshooting 93 93
- Battery replacement 94
- Regulatory information 95
- Electrostatic discharge 96
- Specifications 97
- • ATX 350W Power Supply 98
- Support and other resources 99
- Customer Self Repair 101
- Reparo feito pelo cliente 103
- Acronyms and abbreviations 107
- Documentation feedback 110
- Index 111 111
- Index 112 112
- Index 113 113
Verwandte Produkte und Handbücher für Computerhardware Hp ProLiant ML110 G7 Server
(115 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.112 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern