HP Compaq dc7900 USDT Spezifikationen PDF herunterladen (Seite 90)

4. Open both latches of the memory module socket (1), and insert the memory module into the

socket (2).

Figure 7-13 Installing a DIMM

NOTE: A memory module can be installed in only one way. Match the notch on the module with

the tab on the memory socket.

A DIMM must occupy the black DIMM1 socket.

For maximum performance, populate the sockets so that the memory capacity is spread as equally

as possible between Channel A and Channel B.

5. Push the module down into the socket, ensuring that the module is fully inserted and properly

seated. Make sure the latches are in the closed position (3).

6. Repeat steps 4 and 5 to install any additional modules.

7. Replace the computer access panel.

8. Reconnect the power cord and turn on the computer.

9. Lock any security devices that were disengaged when the computer access panel was removed.

The computer should automatically recognize the additional memory the next time you turn on the

computer.

78 Chapter 7 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 299 300

Keine Kommentare

HP Compaq dc7900 USDT Spezifikationen Seite 90