HP Compaq dc7900 USDT Spezifikationen Seite 116

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 300
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 115
Heatsink
1. Prepare the computer for disassembly (Preparation for Disassembly on page 63).
2. Remove the computer access panel (
Computer Access Panel on page 70).
3. Unscrew the four captive screws that secure the heatsink to the system board.
CAUTION: Heatsink retaining screws should be removed in diagonally opposite pairs (as in an
X) to even the downward forces on the processor. This is especially important as the pins on the
socket are very fragile and any damage to them may require replacing the system board.
4. Lift the heatsink from the processor.
Figure 7-48 Removing the heatsink
When reinstalling the heatsink, make sure that its bottom has been cleaned with an alcohol wipe and
fresh thermal grease has been applied to the top of the processor.
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (as in an X) to
evenly seat the heatsink on the processor. Failure to do so could result in damage that requires replacing
the system board.
104 Chapter 7 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis
Seitenansicht 115
1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 299 300

Kommentare zu diesen Handbüchern

Keine Kommentare