HP Compaq dc7900 USDT Spezifikationen Seite 205

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 300
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 204
Installing the New Optical Drive
NOTE: If you are installing an optical drive in a bay that did not previously have a drive in it, you must
remove the access panel and the bezel blank covering the opening of the bay before proceeding. Follow
the procedures in
Computer Access Panel on page 183 and Bezel Blank on page 185.
1. Attach the release latch to the new optical drive. Refer to Preparing the New Optical Drive
on page 192.
2. With the back of the optical drive facing the computer and the release latch on the inner side of the
drive, align the drive with the opening in the front bezel.
3. Slide the optical drive through the front bezel all the way into the bay so that it locks in place (1),
then connect the cable to the rear of the drive (2).
Figure 9-18 Installing the Optical Drive
Optical Drive Connector
1. Prepare the computer for disassembly (Preparation for Disassembly on page 178).
2. Remove the computer access panel (
Computer Access Panel on page 183).
3. Remove the optical drive (
Removing the Existing Optical Drive on page 191).
4. Push the top of the connector down through the opening of the hard drive cage until the connector
is on the opposite side of the hard drive cage opening.
Optical Drive Connector 193
Seitenansicht 204
1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 299 300

Kommentare zu diesen Handbüchern

Keine Kommentare