HP Compaq dc7900 USDT Spezifikationen Seite 104

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 300
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 103
NOTE: If you are installing a third optional drive, you may need to remove the strap that bundles
the extra power connectors.
6. Connect the power cable (1) and data cable (2) to the rear of the optical drive or diskette drive.
Figure 7-32 Connecting the Drive Cables (Optical Drive shown)
7. If you are installing a new drive, connect the opposite end of the data cable to the appropriate
system board connector.
NOTE: If you are installing a SATA optical drive, connect the first optical drive to the white SATA
connector on the system board labeled SATA1. Connect a second optical drive to the next available
(unpopulated) SATA connector following the numbered sequence of the connectors.
If you are installing a diskette drive, connect it to the connector on the system board labeled
FLOPPY.
If your are installing a media card reader, connect the USB cable to the USB system board
connector labeled MEDIA. If the media card reader includes a 1394 port, connect the 1394 cable
to the 1394 PCI card.
Refer to
System Board Drive Connections on page 85 for an illustration of the system board drive
connectors.
8. Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide for
instructions on using Computer Setup.
92 Chapter 7 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis
Seitenansicht 103
1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 299 300

Kommentare zu diesen Handbüchern

Keine Kommentare