Hp StorageWorks XP10000 Disk Array Bedienungsanleitung PDF herunterladen (Seite 135)

4. Enter the desired numerical IP address in the IP Address text box (Figure 94).

5. Click Set to add the new IP address. The new IP address is added to the IP Address list, but the

changes are not implemented until you click Apply.

6. If you want to apply the changes to the array, click Apply.Click OK on the conﬁrmation message.

Figure 94 Adding SNMP Manager IP Address (Left: Before Setting. Right: After Setting)

Deleting SNMP Manager IP Addresses

To delete a

SNMP Manager IP address:

1. Change to

Modify mode.

2. Click Install (

3. Click the SNMP IP Security tab.

4. Left-click one or more unwanted IP addresses in the IP Address list box to select them. Right-click to

display the Delete IP Address pop-up command (see Figure 95).

5. Select the Delete IP Address command.

6. Aconﬁrmation message is displayed. Click OK to request the delete IP address operation(s), or

click Cancel to cancel.

7. If you want to apply the changes to the array, click Apply.Click OK. If you want to cancel the

changes, click Cancel.

HP StorageWorks

13 5

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 177 178

Keine Kommentare

Hp StorageWorks XP10000 Disk Array Bedienungsanleitung Seite 135