HP 441877-00F Bedienungsanleitung PDF herunterladen (Seite 62)

Diagnostics 62

The Display Diagnostic Log option allows you to view a detailed report of the tests you just ran. When

Diagnostic Log is enabled, test results are recorded in a log file named DIAGS.LOG. If it does not already

exist, the test utility creates it. If it already exists, new data is appended to it. The DISPLAY DIAGNOSTIC

LOG command displays the contents of the log file for your convenience. Each entry in the log file is time

stamped. The test run banner identifies the tested adapter according to its bus slot address.

Accessing the networking submenu

The networking submenu allows you to setup the adapter as a responder and to detect a spanning tree on

the network.

• Setting up as a responder—This allows the user to set up the adapter as a responder so another

system can perform the continuous network test. Selecting this option displays the transmit/receive

screen. This test will fail if the adapter does not have link. Although you can use a variety of

adapters as responders, and either connect directly (with a crossover cable) or through a switch,

ideal results are obtained with a same-type adapter.

When you press the Esc key, the responder operation is cancelled and control is immediately

returned to the Test Adapter menu.

• Detecting spanning tree—This allows the user to detect if a spanning tree is used on the network.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67

Keine Kommentare

HP 441877-00F Bedienungsanleitung Seite 62