HP 200 Unified Threat Management (UTM) Appliance Series Schnellstart Anleitung PDF herunterladen (Seite 124)

118

Figure 79 Network diagram

Configuration procedure

# Create ACL 2000, and configure rule 1 to permit packets sourced from Host B, and rule 2 to permit

packets sourced from Host A.

<Firewall> system-view

[Firewall] acl number 2000 match-order config

[Firewall-acl-basic-2000] rule 1 permit source 10.110.100.52 0

[Firewall-acl-basic-2000] rule 2 permit source 10.110.100.46 0

[Firewall-acl-basic-2000] quit

# Associate the ACL with the SNMP community and the SNMP group.

[Firewall] snmp-agent community read aaa acl 2000

[Firewall] snmp-agent group v2c groupa acl 2000

[Firewall] snmp-agent usm-user v2c usera groupa acl 2000

Configuring Web login control

Use a basic ACL (2000 to 2999) to filter HTTP/HTTPS traffic by source IP address for Web login control.

To access the device, a Web user must use an IP address permitted by the ACL.

You can also log off suspicious Web users that have been logged in.

Configuring source IP-based Web login control

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Create a basic ACL and enter

its view, or enter the view of

an existing basic ACL.

acl [ ipv6 ] number acl-number

[ name name ] [ match-order

{ config | auto } ]

By default, no basic ACL exists.

NOTE:

Support for the ipv6

ipv6-acl-number

option depends on

the device model. For more

information, see

Getting Started

Command Reference

Host B

10.110.100.52

Firewall

IP network

Host A

10.110.100.46

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 149 150

Kommentare zu diesen Handbüchern

Keine Kommentare

HP 200 Unified Threat Management (UTM) Appliance Series Schnellstart Anleitung Seite 124

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software HP 200 Unified Threat Management (UTM) Appliance Series